I wanted to write this blog today about framing. When you look at structures the back bone of the structure is the framing. Whether its metal or wood. With out it you don’t have interior walls and the drywall is not going up. So lets talk about the good and bad jobs of framing.
When you are framing walls, they are usually 16 or 24 inches on center. Floor joists are normally 16 inches on center but can vary from 12 to 24 inches depending the application. And yes your roof trusses are 24 inches on center. Ok that is the basics that you learn as a carpenter the first day on the job. But over time you learn more and more. I have been doing framing for over 20 years and I like to say I am still learning. But seriously. When a carpenter is framing out for interior walls, structural membranes or just furring strips for a room that is converted to a family room from the 3 season room. The framing membranes have to be straight, dry, not cracked or warped and also have to hold the weight of the item you are placing on the wall. Which means it has to be self supporting or attached with fasteners.
Alot of people think that they can take wood and put it up and call it framed. Not true. The true carpenter will know what to use and how to use certain hardware and how to use even the bad wood for certain items. Now there is a difference from the true carpenter to just a novice. The novice may not take in consideration the extra prep work of framing the walls. Additionally, as odd as it may seem, using a level for framing walls is not correct. Plumb bobs and tape measure or laser levels. Lastly, when a consumer wants something framed, they should asked have you done this type of work before. Framing a deck, stairs, or just a small wall. Also framing a wall with wood will not be perfectly level. Close but not perfect. The reason is because the wood will always be a 1/16″ different from each. Check it. The nominal measurement for a 2×4 is 1 5/8 x 3 5/8 but will vary.
So in closing, when framing out an area or hiring someone the quality control on the project of selecting the best framing members is essential. Installing them correctly is also essential because of one reason. With out them being plumb the drywall will not attach right and you will see imperfections. And also the framers will take pride in building what you want correctly the first time.
We perform framing of all types throughout Pasco and Pinellas County. From Clearwater to Zephyrhills, from Hudson to Wesley Chapel. For more information, call us at 352-437-5300 or visit our website; www.pascoremodel.com