Gutters

Sunday’s blog is about gutters. It seams that down here a lot of homes do not have gutters installed or are installed later. Gutters are the number one way to stop land erosion, flooding, and inconvenience. Additionally an improper gutter system is more defective then none at all. So lets begin about this theory of transferring rain water to a different location.

The main purpose of gutters is to direct the rain water off the roof and discharge to an area away from the foundation. This may sound simple. But if you have a gutter system installed and it is not the appropriate type you are wasting your money. For a typical residential home, a lot of gutters are 5 or 6 inch. The 6 inch gutter is definitely ideal for areas that get some rain but not a lot. 5 inch gutter I would recommend if you live Southern California or Arizona where the rain is very small amount. Living along the east coast like Florida, Maryland, Delaware there is a lot of precipitation that gets in the gutter. In certain states they work constantly from rain to snow. Here in Land O Lakes Florida the rain season constantly works the gutter. So you may ask what is the answer. Its easy.

If you have a gutter system installed it has to contour with the roof. For example you should not install a 5″ gutter on a church roof that is 12-12 pitch. Totally defeats the purpose because of the roof pitch. The gutters are over loaded. But for a single family home like in Clearwater Florida a 6 inch gutter may work for a single family home with a small pitch. Then you have the down spouts to discharge the water. Again, you do not want water going back toward the foundation. Why? Erosion, leaks, issues, and just a plain headache.

The best way to discharge water off the roof is to have the rain water discharge away from the property. Sounds easy but you do not want the rain water discharging in front the garage or your side entrance. Additionally, you can have a #frenchdrain installed as well for your gutter systems. So lets think about this. Do you want to have a system that does not work properly but say we have gutters. NO. If the pitch of the roof in #Florida is above 4-12 pitch then you need at least a 6 inch gutter. If not the water when it rains down here will defeat the purpose. A lot of manufactures will use a 7 inch gutter with a leaf guard so you do not need to clean anymore. This is good, but check other manufactures too.

Make sure if you want to do the investment of gutters they are seamless and check the warranty. Also ask about the gutter covers. Trust me. For more information check our website at; www.pascoremodel.com or call us anytime at 352-437-5300

Advertisements

The Toilet Operations

This weeks blog is about the commode. Ever wonder how it really works? Do you think its a science by itself or just by imagination everything goes together. What if it does not flush properly or the toilet rocks. The tank or the bowl. Do you know the difference. Did you know that the parts of the toilet assembly are very economical to replace and maybe done yourself. So lets talk about the commode or as some call it the porcelain king/queen.

Your typical toilet consist of the bowl and the tank. The bowl is the part that has the water and holds the seat. The tank is usually the part that has the mechanisms to operate the toilet. The bowl has a trap to flush the entities out into the sewer pipe. At the bottom of the bowl you have a flange which needs a wax ring to secure to the flange and prevent sewer gas coming from the sewer. The tank is the essential part of the appliance. In the tank you have a flush mechanism, a flapper with water fill tube and the handle. Under the tank connected to the bowl you have gaskets at various locations to seal the water. Then you have the water supply line.

{Some new tanks have items such as air tanks and different flush mechanisms that will depend on the need of the visit of the commode.}

The tank and bowl can be a very complicated process if you do not understand the process. For example, ever hear the toilet fill up in the middle of the night? Did you ever see small water behind the toilet and not know why? Or. All of sudden the toilet starts to rock, literally like in a rocking chair.. Wonder what causes this? This is caused by failure of the mechanisms and fasteners. The toilet that fills itself is due to the fact that the flapper needs replaced. The time you flush the toilet and the water takes forever is caused by the flush mechanism failing or the supply line has debris in the line. The water that seeps mysteriously is usually due to the gaskets in the tank, the supply line failing or condensation of the bowl. And if you ever see water on the floor when you flush, the wax ring has expired.  These are simple items that can be replaced at a very economical cost. We perform these a lot and still charge our clients a small amount.

But then is the biggy, the rocking of the commode. When this happens its usually 2 things. It maybe the fact that the tank is loose and you need new tank bolts. But if the entire commode rocks, its failure of the bowl bolts. The entire toilet has to be removed from the flange on the floor. A new wax ring is needed with bolts and the flange needs to be inspected. The flange can not have any cracked or missing areas. The bolts need to secure to the flange. If not you will not secure the toilet to the flange properly. Sometimes you have to replace the flange and this will need to be done by a licensed plumber.

So in closing, a leaky or rocky commode is an issue. Some maybe that small job or some you need to consult with a plumber. We have done this type of repair for a lot of clients in Dade City, Richland, Holiday and Wesley Chapel and referred plumbers as needed. For more information call our office anytime at 352-437-5300 or visit our website at; www.pascoremodel.com

Differences Between Small Jobs & Handyman

I wanted to take this time to share the difference between what a contractor does when performing small jobs and the local handyman. There is a big difference. Now I am not taking anything away from people who perform odd or small jobs. They may have the experience or are retired. However, there are ones out there that are just not informed or trained properly. The blog this week will inform you the difference and what to ask when selecting someone to do a small job. So lets begin.

We get calls all the time to perform small jobs for clients. Just today we completed a variety of tasks for a property owner who is renting a small town home in Land O Lakes, Florida. The jobs were small and we itemized the billing so the owner knew what he was be billed for. At the end of the day, the renter stated that one bedroom door was not closing properly.  On the initial walk thru it was never mentioned about this. So in attempt to fix the door, we found that the door is a 32″ door and not a 30″ door which would had properly fit the frame. This is an example of a person not knowing the proper way to install doors. Also very un-professional for everybody.  We installed the new door and everything was fine. On something like this contract, the jobs were small and were done correctly. We made sure the renter was satisfied and if they had any questions. After our job is complete we warranty that contract for 2 years, not 1 year as required.  And yes  if there is issues, then we make sure its taken care of. Sometimes hardware fails. Sometimes humidity will play factors and we will have to plan the door down from winter to summer. No charge to the client.

Now lets talk about the local guy. Biggest question is to ask is the experience.. Like I said before, some are near retirement and just want some small jobs to keep busy. That is fine. But in the example above, would he had been able to install the door properly? Or would he cut about an inch off each side and try to make it fit. Another thing to ask people is license and insurance. And lastly, the local guy may not have a warranty. Will he come back if the caulk shrinks up on the tub? If the door swells will he plan it down that 1/16″ if need be?

So in closing, there are handyman that do small jobs but may not be properly experienced or reliable for that job. And there is contractors that do small jobs for clients and will stand by their work. So next time you are looking to hire someone, ask them. After all, the in home estimate is like a short interview. Both parties want to be a good fit for each other. We provide these type of services and others in Dade City, Wesley Chapel, Bayonet Point and Holiday Florida all the time. Feel free to call us at 352-437-5300 or look us up on the web; http://www.pascoremodel.com  Thank You.