Drainage

If you have been following our Facebook page  and tweets we wrote about moisture intrusion and drainage. A lot of leaks are due to poor drainage and or lack of maintenance.  So this weeks blog is about drainage on the home and how to help avoid the terrible effects of moisture intrusion. So lets begin.

With the rain season in Florida a lot of us experience areas on the home that get more rain water then others. Some of this maybe the landscaping and some is deterioration of somewhat on the home. Lets start with the roof. the flashing around vents is an actual maintenance item. Then you have the valleys which leaves and debris can be collected and will contribute to water getting in them. And then you have the gutter system. Having a gutter is great but if its undersized then you shouldn’t have any at all.

Alot of Florida homes don’t have gutters because they think that the rain is too heavy to capture. One foot of 5″ K-Style gutter holds 1.2 gallons of water. One foot of 6″ K-Style gutter holds 2.0 gallons of water. For commercial applications, box gutters, can be made in 7, or 8 inches or even larger custom sizes that hold even more water. So this is something to think about. But you are saying, I have good gutters. Now you may need to extend the downspouts. Something to think about is adding a French Drain to the foundation area so to divert the water away from the foundation. This is a major difference between the homes here and up north. A lot of homes with basements always have a sump pump for this reason.

And lastly our driveways and other areas is something to think about as well. Adding a channel drain is a good idea. And keeping an eye on the mulch and landscaping as you do not want the area to be sloped toward the foundation.

So with this in closing. Check with the local building department about re-capturing rain water. It can actually be reused for watering the lawn to even water for toilets. Thank you and if you have any questions about this or any of our services, feel free to check us out at; www.pascoremodel.com or even better call us at 352-437-5300.

 

 

Advertisements

Being A Contractor

I hope everyone enjoyed their Independence Day Holiday. We enjoyed a few days off and got to catch up with friends and family. While coming back from the holiday we had a few appointments and it amazes me still how some people think they are a contractor. I wanted to share this blog with you. So lets begin.

While doing estimates in the Lutz and Land O Lakes, Florida area a few clients had called previous people for estimates. Some were we can start tomorrow. Some told my clients sure I can take that for you and then show up and the ladder does not reach the window. Come to find out these are just jobbers being recommended on social media. This actually makes me mad. We have companies out there that are completly legit and then the ones who operate sneaky.  Who is going to select a contractor that does not have correct references, license, insurances, and most of all proper tools. If saving a few dollars is one thing but is that jobber or handyman going to be there when stuff fails that they did. NO!  They will address it once, maybe then ignore you, run, hide, change their number or worst leave the state. Now you the consumer are stuck with a messed up job, out of money and hurt. a

The reason for this blog is 2 of our clients almost got scammed. We get it save some money but when you have a small bathroom remodel and the handyman or jobber says we can start tomorrow. I would run. This also concerned our client.

So, to all our followers and future clients make sure you ask the proper questions.

  1.  Do you have pictures and references of your work?
  2. How long in the trades?
  3. What is your schedule like?
  4. Do you have insurance and license and can you provide a copy?                            (this stops the handyman rip offs!)
  5. And lastly, what type of warranty do you provide?                                                          (by law 1 year. PHRR we provide 2 years)

So in closing do not get hoods-winked by people that think they are a contractor. Instead go with one that can properly answer the 5 basic questions to any client.

Remember, at Pasco Home Remodeling & Repair, we provide all types of home remodeling, repair, and renovation in the Zephyrhills, Holiday, Dade City and Wesley Chapel Florida areas all the time. For more info, contact us at 352-322-2700 or http://www.pascoremodel.com

Thank You.

Self Closing Hinges

Today’s blog is about self closing hinges. When doing inspections on homes this little part is really almost forgotten. So in today’s blog we will discuss where you need them, why you should have them and what they are. So lets begin.

Self closing hinges are a hinge that is designed to be placed in the door where the original manufacture hinge was installed. There are many variations on the market, but for all intentional purposes you want the one that is approximately 3 1/2″ in height. When installing these type of hinges they normally fit into the existing mortised area. A tad bit of chiseling maybe needed near the edges.  Its extremely important to you the size of the existing hinge. Don’t try to by a 5 inch hinge to replace the 3 1/2″ hinge. It will not work.

So why do we have them? These type of hinges are designed mainly for doors that lead into the garage. The purpose of these is to close the door freely, as to not allow any carbon monoxide into the home.  So for example. Lets say you are coming home with the kids and groceries but have to run back out to get to a meeting. Its cold. So you pull in to greet your spouse at the door. Car is running in the garage. You are unloading back and forth with groceries and kids.  The door is open and you just now allowed the carbon monoxide to go into the home. Oh, you just set the CO2 alarm off too.  With these type of hinges the door should not be propped open. (states in the directions) And the door closing will assist to blocking a lot of the CO2 gas from the engine.

You may see these type of hinges on office areas in the home or a room that you may have valuables or guns.  For example, my home office has these type of hinges.

So in closing, these type of hinges are very economical to install and of course we can as well.  Most of them come in different finishes for example, stainless to black copper.  You can get these at the big box store as they are sold individually. (You need 2) Or we can supply them too from our manufacture. We will be gladly to install these at your home in Land O Lakes, Hudson, Holiday, or Dade City Florida.  For more information about self closing hinges or any other type of repairs, please call us anytime. 352-437-5300 or look us up on the web; www.pascoremodel.com Thank You.

 

Drapes and Blinds

I know this maybe an un-usual post from a carpenter contractor. But we actually get this request a lot. So lets start with why and what you should install and where. So lets begin.

Draperies and blinds can add value and comfort to any room. When remodeling adding these to your finished room will set the presence just as lighting sets the aviance.  Back in the day our moms would change the drapes with the seasons. The heavy rubber back for the winter and the lighter ones for summer. Then as time changes our windows improved. Here in Florida it still amazes me of builder grade metal windows from back in the day.

So, difference between blinds, drapes, or nothing. Nothing is not an option for privacy unless its a sun room. A lot of consumers like the curtains in the formal living room or dining room. Master bedrooms can go either way. As far as your offices and maybe study,  I definitely recommend placing drapes with a blind, because of the lighting. And we can go on and on with other rooms. The biggest thing is to select a drape or blind system that will incorporate the window with the room. Allow sun and view when wanted. And lastly, what will fit in your budget.

We can help with this for you. Whether you want a blind installed or help choose. Maybe installing new curtain rods with blinds. If you are in Zephyrhills or Holiday. From Eifers to Richland Florida we are there for you. Contact us today at 352-437-5300 or http://www.pascoremodel.com

Happy New Year

As we close out 2016 and about to enter 2017. From our family to yours, we wish everyone a Safe and Prosperous Happy New Year. Our office will be closed on Monday 02 January and will resume normal business functions starting Tuesday. And our normal blogs will continue the first Sunday of January which we will be discussing carpentry.

Contractor Financing

I wanted to share with you a brand new feature we have for clients. Sometimes we may be a bit short of cash and need repairs to our home. Or we maybe waiting on payday but need some minor maintenance done to our home. Or while in a contract, the budget may run over of unexpected costs. There are a lot of different ways that a home remodeling project can be financed. We at Pasco Home Remodeling & Repair take pride in offering services that not only are reputable, easy, convenient and cost effective for the consumer and for the contractor.

As of today we have partnered with PayPal for financing. Its easy to sign up. No waiting, no long lines at the bank and no interest for 6 months on projects over $99.00. We feel that this is a great benefit to our clients to assist in getting that project completed quickly. On our website, www.pascoremodel.com, there is a special window for terms and faq’s about this program thru PayPal. Or if you have any questions feel free to call us anytime at the office at 352-437-5300. Remember at #PascoRemodelin, we are the can do contractor.

 

Drafty Windows

Hello everyone. This weeks blog is about drafty windows. No matter if you are up north or here in Florida we are in the season where we are opening our windows more. So I wanted to share some useful tips about windows & how you may save on that heat bill. So, lets begin.

It does not matter if you have double or single hung windows. If the glass is triple pane or the old lead style glass with the wood frames. Some of us still have a jalious style for the sun room. All windows will allow a small draft in and allow heat or air condition to escape out. Its just the nature of the business. Now don’t be alarmed. Its actually good that it does.

There are a lot of window manufactures out there that say they are energy efficient windows. Some even go to the point of saying we will reduce your energy bill or pay the difference. (I wish that guarantee was around when I was kid visiting family in winter in Western MD back in the 70’s) So lets really take a look at this. A lot of your windows today that are installed are vinyl or wood style framed. You see the metal style when its usually a builder with new homes. And yes there are many different styles from a bow to bay window. A single hung to a double hung. Then you have new construction, replacement and my favorite stucco windows. But not to get too in depth with the manufacturing  the windows in a home allow sun and heat in with a breeze and keep the bad elements out. But you still have a draft.

Well lets start that every window and frame is going to allow a small bit of heat or cold in and out. The one reason is because the framing and installation. The insulation in the framing pocket may have holes in them. Also, the window may not be perfectly level and plum in the opening. The window may have shifted just enough over the years because of usage. Vinyl windows will expand and contract slightly to allow this draft. Again this is good. Think about it. If the frame was all rigid and tight there wouldn’t be that small allowance when the sun expands it or the cold makes the vinyl contract. This is really the gap I am referring that is almost impossible to control. But there are other measures. The window hardware and exterior maintenance too.

The hardware in the window is mainly a balance system. Back in the old days it was a lead weight with rope. Now we have gotten away from that system and have a bit more economical approach. The balances work on weight. So for example the balance has to hold the window sash’s weight.  When this part fails, normally the upper sash starts to seep down. Or the lower sash may not close tightly. This will allow a gap in the window where you will feel the temperature difference. The exterior caulking needs to be maintained too. This will allow moisture to enter the framing area and also allow that heat or cold in.

So here is a quick check to see if the windows need a bit of maintenance. On a hot day feel around the drywall area of the window. If it feels overly warm there maybe some insulation that needs attention or the window may need to be realigned. If the window lock does not latch easily then the tracks may need cleaning or the hardware replaced. And if you see any kind of moisture stains (moisture intrusion) then their is a leak on the outside and maybe from the caulk.

Now in closing, yes replacing the old wood style single pane windows with triple pane low e glass will save you money on utilities. Just remember the cost to install too. For more information call us at 352-437-5300 or look us up at: www.pascoremodel.com We service all of Port Richey, Zephyrhills, Hudson and Holiday Florida areas. Thank You.

Code Inspections

The blog is a few days early but wanted to share an experience about code inspections. The purpose of them and what could happen if you don’t get a permit.  So lets jump in.

When you are doing any type of major remodeling you should obtain a permit. A lot of municipalities will allow the home owners to be the general contractor or home owners can obtain a permit for like kitchen remodeling and other small renovations. Some municipalities will not allow home owners and unlicensed professionals to add new service for electrical, plumbing and or HVAC. So before starting the next remodeling project, check to see if you may need one with the local building department.

To start the local municipality will want permits for new fence, new air condition unit, siding, new windows, bathroom and kitchen remodeling. The reason behind this is because you may have multiple trades involved. For example, when Pasco Remodel, is contracted for a kitchen remodel you have us, probably an electrician and plumber. All aspects of this kitchen have to be fully operational for a final inspection. Think about it. Do you want the cabinets to be not level or the receptacles not energized properly when the contract is done.  Alot of people believe that once you obtain a permit, your taxes will go up due to improvements. This aspect isn’t true. Property taxes increase based on the area and improvements of the municipality. However, if you add an addition, yeah you added square footage to the home. So, you may have a slight increase based on the new square footage of the home compared to previous tax year.

Now, lets say you have the permit and are beginning the project. If its a contractor then they will have everything scheduled for this project. The other trades will have permits and additionally everything will be scheduled by the general or main contractor. This process is the easiest and runs smoothly. But, lets say the home owner is doing the work. OK, no biggy. But if the home owner does not schedule the contractors properly then the job can take months, instead of a few weeks. Also if the home owner is able to allow friends to help and they do not do the work properly and the inspections fail it is up to the home owner to correct the deficiencies performed by friends that are in the trades. This can become very expensive and time consuming. One reason is, the counter-top is waiting to template the counter-top then install it. They don’t want to wait manly because of any liabilities and also inventory.

So, now you may say, well we may need a bit of help to guide us. Home owners want to do the work as they take pride in the home. Contractors may be assigned a small part such as trim or tile installation and then they are completed that evolution. So whats the answer. Well this is how #PascoRemodel is different then other companies. First we can be a construction manager for the owner. Additonally, the owner is also a licensed home inspector in Florida and Maryland. Lastly, plans and review will want a blue print drawn. We can do that if we are the manager or consultant.

So in closing, we meet with home owners all the time that like to be part of the project. We will gladly assist in that phase. Or just be happy to install the trim and call it a day. So remember, before your next building project, consult with someone who is willing to work with you. A small fee for a consultant maybe better then having your place condemned if the work is not done properly.

For more information about this service, feel free to call us at 352-437-5300 or look us up on the web at: http://www.pascoremodel.com  We will gladly perform this type of service in Zephyrhills, Holiday, Hudson and Land O Lakes, Florida to name a few areas.

 

 

Trim Moldings

Good Morning. Today’s blog is about trim. Now for a lot of us we usually think that trim is for decorative purposes. For the most part yes. However, trim molding services actually as a lot of other purposes that we may not know. The reason I am writing this, I had a friends son ask me about this in Tampa, Florida and figured wow, good one. So lets begin.

Trim molding for doors, windows, walls, and flooring have two main purposes. The first purpose is to cover the rough framing or gap as needed for that element. For example, If you have a window that has trim around the edge, it normally is covering the 2×4’s and insulation. Then it is sealed to prevent any bugs or drafts entering the home. This will be the same for trim around door frames, interior or exterior doors.  The second purpose of course as we all know is decorative. Especially, the box style ceiling or the picture frames.

Now lets talk about the trim you may see in a room say a dinning room. The trim placed there is strategically placed that dates back into history. Yes when you walk into a dinning room and see the trim it gives a presence of eye candy to make the room more charming and appealing. The crown molding when it was originally placed in homes was installed to cover the cracks that may appear in the upper corners from the old plaster. Also the trim was placed to help with house keeping. When the trim was originally painted they used oil base paint with a gloss sheen. This in turn helped with cleaning.

Now you have the baseboard trim and the floor trim. Yes both are different. The baseboard trim serves as a purpose to cover any gaps from the drywall when installed. Normally drywall is installed about a 1/2″ off the floor for leveling and if water gets on the floor. Also again, the trim is installed to assist cleaning to collect the dust and protect the walls from moving furniture and the good old vacuum cleaner. Then you have the floor trim. Alot of people do not use this term. Floor trim is the  1/4 round or shoe molding that goes on and is nailed to the baseboard. You only see this trim installed with hardwood or engineered flooring products. The purpose of this trim is only for covering the gaps because the floor product needs an expansion gap which the baseboard trim may or may not cover.

And to save the best for last and my favorite is the chair rail trim. Yes it is just for that. The trim is usually installed about 44 inches from the floor. It is not to cover the seam of the drywall at 48 inches.  As I stated early in the blog, your typical dinning room would have trim placed strategically areas for a reason. Chair rail molding is very dectorative and I feel gives any room, espeically the dinning room a sense of formal appeal. And yes, the trim is supposed to take a beating. Moving the chair and it may hit the trim.

Now, that you have a better understanding about trim molding, I hope this helps anyone. We can talk more in another blog about paint and stain coverings for of different wood trim and engineered trim in another blog. We can proudly install trim in your home in the Zephyrhills, Bayonet Point, Holiday, and Tarpon Springs Florida area.  If you have any questions, please call us anytime at 352-322-2700 or visit our website, www.pascoremodel.com