Code Inspections

The blog is a few days early but wanted to share an experience about code inspections. The purpose of them and what could happen if you don’t get a permit.  So lets jump in.

When you are doing any type of major remodeling you should obtain a permit. A lot of municipalities will allow the home owners to be the general contractor or home owners can obtain a permit for like kitchen remodeling and other small renovations. Some municipalities will not allow home owners and unlicensed professionals to add new service for electrical, plumbing and or HVAC. So before starting the next remodeling project, check to see if you may need one with the local building department.

To start the local municipality will want permits for new fence, new air condition unit, siding, new windows, bathroom and kitchen remodeling. The reason behind this is because you may have multiple trades involved. For example, when Pasco Remodel, is contracted for a kitchen remodel you have us, probably an electrician and plumber. All aspects of this kitchen have to be fully operational for a final inspection. Think about it. Do you want the cabinets to be not level or the receptacles not energized properly when the contract is done.  Alot of people believe that once you obtain a permit, your taxes will go up due to improvements. This aspect isn’t true. Property taxes increase based on the area and improvements of the municipality. However, if you add an addition, yeah you added square footage to the home. So, you may have a slight increase based on the new square footage of the home compared to previous tax year.

Now, lets say you have the permit and are beginning the project. If its a contractor then they will have everything scheduled for this project. The other trades will have permits and additionally everything will be scheduled by the general or main contractor. This process is the easiest and runs smoothly. But, lets say the home owner is doing the work. OK, no biggy. But if the home owner does not schedule the contractors properly then the job can take months, instead of a few weeks. Also if the home owner is able to allow friends to help and they do not do the work properly and the inspections fail it is up to the home owner to correct the deficiencies performed by friends that are in the trades. This can become very expensive and time consuming. One reason is, the counter-top is waiting to template the counter-top then install it. They don’t want to wait manly because of any liabilities and also inventory.

So, now you may say, well we may need a bit of help to guide us. Home owners want to do the work as they take pride in the home. Contractors may be assigned a small part such as trim or tile installation and then they are completed that evolution. So whats the answer. Well this is how #PascoRemodel is different then other companies. First we can be a construction manager for the owner. Additonally, the owner is also a licensed home inspector in Florida and Maryland. Lastly, plans and review will want a blue print drawn. We can do that if we are the manager or consultant.

So in closing, we meet with home owners all the time that like to be part of the project. We will gladly assist in that phase. Or just be happy to install the trim and call it a day. So remember, before your next building project, consult with someone who is willing to work with you. A small fee for a consultant maybe better then having your place condemned if the work is not done properly.

For more information about this service, feel free to call us at 352-437-5300 or look us up on the web at: http://www.pascoremodel.com  We will gladly perform this type of service in Zephyrhills, Holiday, Hudson and Land O Lakes, Florida to name a few areas.

 

 

Advertisements

Fascia & Siding Boards

Hello everyone. As we are approaching spring we maybe noticing some exterior repairs. Especially about siding and fascia boars. This weeks blog is about that. In addition we will mention about different products that maybe cost effective to help repair certain items. So lets begin.

Depending upon the architecture of the home, we all have different styles of houses. We may have the traditional thick stone or brick that is structural and went on to be a a facade. We may have vinyl or wood siding, very common in many areas. And then we have a new product that came on the market about 10 years or so and that’s a composite type. As industry and manufactures have changed with the time we also have vinyl trim products too. (Yes vinyl decking is from those manufactures) But lets talk about the composite and vinyl style products. Vinyl siding is very economical and is mostly used around the country. The composite has been coming around more and more. They are low maintenance and just as economical, until you have a repair. We have a contract in New Port Richey, Florida to repair/replace the siding that is a composite. The style can be very attractive to the home and economical too. However there are maintenance items that need to be adhered to because of the environment.

For example, a type of siding that is fiber cement siding with wood grain is 5/16″ thick. But it is brittle when installing. The top is more durable then other products. This type of siding may need to be painted in time as routine maintenance. The ends do need more attention. For example, there has to be spacers installed because of moisture and to secure the planking. Additionally, this type of product does not have an insulator like the vinyl products that can be applied too.

There are as well trim boards that are similar. A fiber cement board that is a 1×6 has to be installed to precise level. The best part, these boards aren’t as warped like a true 1×6 primed wood trim board. There are vinyl types as well but a bit more expensive.

So with repairing trim boards, I definitely recommend a composite style. This is because of the durability. The siding, well that is a homeowners preference. We perform this type of carpentry thru out #PascoCounty Florida. For example, Zephyrhills, Holiday, Hudson to Wesley Chapel. If you like to learn more about this type of product, call us anytime @ 352-322-2700 or email @pascoremodel@gmail.com